產品詳情

  • 產品名稱：韓國DACELL儀表DN-830/DN830

  • 產品型號：DN-830/DN830
  • 產品廠商：韓國大拿DACELL稱重傳感器
  • 產品價格：0
  • 折扣價格：0
  • 產品文檔：
你添加了1件商品 查看購物車
簡單介紹：
韓國DACELL儀表DN-830/DN830 這個DN830重量指示器是設計用于與任何稱重儀器,包括包裝機、重量檢查系統,flatfirm鱗片,拉伸/壓縮測試人員,已被廣泛的工業應用。本產品配有兩個配合RS232C端口,允許溝通與外部設備如電腦。由于其三個繼電器輸出,這重量指示器提供易用性在控制體重。
詳情介紹：
韓國DACELL儀表DN-830/DN830
DN-830

The DN830 weight indicator is designed for use with any weighing instruments, including packaging machines, weight check systems, flatfirm scales, and tensile/compression testers, which have wide industrial application. This product is equipped with two RS232C ports that allow for communicating with external devices such as PCs. Due to its three relay outputs, this weight indicator provide ease of use in controlling weight.

  • Provides better shielding against external noise;
  • Has a display resolution of 1/20,000;
  • Weight back-up when power failure;
  • Capable of storing electrostatic data;
  • Equipped with the RS232C;


 

Various functions

  • 2 Embedded terminals for external input (zero point, with container/ without container)
  • By using DC power, input power can be used in 12V-24V regardless of polarity (300mA or over is advisable)

Option

  • RS422, Option: 4-20mA (additional option)
   
  • Specification
Specifications Accuracy
Application sensor Strain guage sensor (350Ω or 120Ω)
Input Sensitivity 0.3? / D
Loadcell Input Voltage DC 10V (±5V)
Zero-Point Calibration Range -0.6mV ∼ +1.5 mV
Max. Loadcell Input Voltage 32mV
Temperature Coefficient Zero-Point: ±10 PPM/℃
Span: ±10 PPM/℃
Input Noise ±0.6? P.P
Input Impedance 10? or Higher
Character height 7 Segment 6-digit, 14mm
Sampling speed Max 200 times/sec
A/D Resolution 520,000 Count(19bit)
Non-Linearity 0.01% FS
Relay output 3 control relay built-in
Usage temperature range -5℃ ~ 40℃
Humidity less than 85% RH (no dew condensation)
Power source used 12V~24V

 
  • Dimension (unit:㎜)
產品留言
標題
聯系人
聯系電話
內容
驗證碼
點擊換一張
注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!

滬公網安備 31011402005142號